
Prace gorące

Przez prace gorące rozumie się prace z wykorzystaniem sprzętu spawalniczego, tnącego, udarowego, lutowniczego i szlifierskiego, a także prace dekarskie, z użyciem otwartego ognia i narzędzi na gorące powietrze oraz innego rodzaju prace z wykorzystaniem ognia lub narzędzi generujących ciepło.
Podczas wykonywania pracy gorących należy:
-
Poświęcić dwie minuty na przemyślenie procesu pracy.
-
Sprawdzić, czy w pobliżu (nad, pod lub obok) nie znajdują się materiały łatwopalne.
-
Ocenić, czy gorąca praca może powodować emisję spalin z farb, systemów rur, mas wyrównujących lub powierzchni poddanych obróbce.
-
Zapewnić odpowiednią wentylację.
-
W razie potrzeby skorzystać z obserwatora pożarowego, aby utrzymać kontrolę nad procesem.
-
Posprzątać po zakończeniu pracy i sprawdzić sprzęt.
-
Rozważyć usunięcie lub wyczyszczenie sprzętu ochronnego po zakończeniu pracy.
W przypadku wyczerpania::
Praca w upale, zwłaszcza w ekstremalnych warunkach, może prowadzić do udaru cieplnego lub słonecznego.
W przypadku zaburzeń widzenia, nudności, zawrotów głowy, bólu głowy:
-
Przenieś osobę w chłodniejsze miejsce i podaj jej dużą ilość płynów (woda, sok itp.).
-
Jeśli to konieczne, schłodź osobę, umieszczając jej dłonie, przedramiona i stopy w chłodnej wodzie (15-20°C).
W przypadku omdlenia:
-
Wezwij karetkę.
Pamiętaj, że bezpieczeństwo zawsze jest najważniejsze!
Te wytyczne stanowią podstawę zdrowia, środowiska, bezpieczeństwa i jakości w FH Contractors. Przestrzegając ich, przyczyniasz się do naszego wspólnego celu utrzymania wysokiego poziomu bezpieczeństwa na miejscu pracy, co chroni zarówno ludzi, środowisko, jak i sprzęt.
9 Life Saving Rules

Bypassing Safety Controls
Obtain authorisation before overriding or disabling safety-controls:
-
I understand and use safety-critical equipment and procedures which apply to my task
-
I obtain authorisation before:
-
disabling or overriding safety equipment
-
deviating from procedures
-
crossing a barrier
-

Confined Space
Obtain authorisation before entering a confirned space:
-
I confirm energy sources are isolated
-
I confirm the atmosphere has been tested and is monitored
-
I check and use my breathing apparatus when required
-
I confirm there is an attendant standing by
-
I confirm a rescue plan is in place
-
I obtain authorisation to enter.

Safe Mechanical Lifting
Plan lifting operations and control the area:
-
I confirm that the equipment and load have been inspected and are fit for purpose
-
I only operate equipment that I am qualified to use
-
I establish and obey barriers and exclusion zones
-
I never walk under a suspended load.

Work Authorization
Work with a valid permit when required:
-
I have confirmed if a permit is required
-
I am authorised to perform the work
-
I understand the permit
-
I have confirmed that hazards are controlled and it is safe to start
-
I stop and reassess if conditions change.

Driving
Follow safe driving rules:
-
I always wear a seatbelt
-
I do not exceed the speed limit, and reduce my speed for road conditions
-
I do not use phones or operate devices while driving
-
I am fit, rested and fully alert while driving
-
I follow journey management requirements.

Hot Work
Control flammables and ignition sources:
-
I identify and control ignition sources
-
Before starting any hot work:
-
I confirm flammable material has been removed or isolated
-
I obtain authorisation
-
-
Before starting hot work in a hazardous area I confirm:
-
a gas test has been completed
-
gas will be monitored continually.
-

Working at Height
Protect yourself against a fall when working at height:
-
I inspect my fall protection equipment before use
-
I secure tools and work materials to prevent dropped objects
-
I tie off 100% to approved anchor points while outside a protected area.

Energy isolation
Verify isolation and zero energy before work begins:
-
I have identified all energy sources
-
I confirm that hazardous energy sources have been isolated, locked, and tagged
-
I have checked there is zero energy and tested for residual or stored energy.

Line of fire
Verify isolation and zero energy before work begins:
-
I position myself to avoid:
-
moving objects
-
vehicles
-
pressure releases
-
dropped objects
-
-
I establish and obey barriers and exclusion zones
-
I take action to secure loose objects and report potential dropped objects