
Arbejde i højden >2 meter

Sikkerhedsregler ved arbejde i højder over 2 meter
-
Du skal ikke arbejde i højden alene.
-
Før du arbejder i højder over 2 meter, skal der foretages en sikkerhedsvurdering. Arbejdslederen er ansvarlig. Dette skal dokumenteres.
-
Du skal bruge en godkendt faldsikringssele med to kroge.
-
Du skal have dokumenteret oplæring i brug af sele.
-
Når du bruger en krakk eller gardintrappe på stillads eller udvendige platforme, og afstanden til rækværket er mindre end højden på krakken/stigen, skal du bruge faldsikringssele.
-
Fastgør faldsikringsselen så højt som muligt for at reducere et eventuelt fald. Forankringspunktet skal modstå en kraft på mindst 1500 kg.
-
Afspær området under arbejdspladsen, hvis der er fare for faldende genstande (se mere om faldende genstande).
-
Kontroller, at faldsikringsselen har en godkendt årlig certificering - svarende til løfteudstyr.

Husk, sikkerhed kommer altid i første række!
Disse retningslinjer udgør fundamentet for sundhed, miljø, sikkerhed og kvalitet hos FH Contractors. Ved at efterleve dem bidrager du til vores fælles mål om at opretholde et højt sikkerhedsniveau på arbejdspladsen, hvilket beskytter både mennesker, miljø og materiel.
9 Life Saving Rules

Bypassing Safety Controls
Obtain authorisation before overriding or disabling safety-controls:
-
I understand and use safety-critical equipment and procedures which apply to my task
-
I obtain authorisation before:
-
disabling or overriding safety equipment
-
deviating from procedures
-
crossing a barrier
-

Confined Space
Obtain authorisation before entering a confirned space:
-
I confirm energy sources are isolated
-
I confirm the atmosphere has been tested and is monitored
-
I check and use my breathing apparatus when required
-
I confirm there is an attendant standing by
-
I confirm a rescue plan is in place
-
I obtain authorisation to enter.

Safe Mechanical Lifting
Plan lifting operations and control the area:
-
I confirm that the equipment and load have been inspected and are fit for purpose
-
I only operate equipment that I am qualified to use
-
I establish and obey barriers and exclusion zones
-
I never walk under a suspended load.

Work Authorization
Work with a valid permit when required:
-
I have confirmed if a permit is required
-
I am authorised to perform the work
-
I understand the permit
-
I have confirmed that hazards are controlled and it is safe to start
-
I stop and reassess if conditions change.

Driving
Follow safe driving rules:
-
I always wear a seatbelt
-
I do not exceed the speed limit, and reduce my speed for road conditions
-
I do not use phones or operate devices while driving
-
I am fit, rested and fully alert while driving
-
I follow journey management requirements.

Hot Work
Control flammables and ignition sources:
-
I identify and control ignition sources
-
Before starting any hot work:
-
I confirm flammable material has been removed or isolated
-
I obtain authorisation
-
-
Before starting hot work in a hazardous area I confirm:
-
a gas test has been completed
-
gas will be monitored continually.
-

Working at Height
Protect yourself against a fall when working at height:
-
I inspect my fall protection equipment before use
-
I secure tools and work materials to prevent dropped objects
-
I tie off 100% to approved anchor points while outside a protected area.

Energy isolation
Verify isolation and zero energy before work begins:
-
I have identified all energy sources
-
I confirm that hazardous energy sources have been isolated, locked, and tagged
-
I have checked there is zero energy and tested for residual or stored energy.

Line of fire
Verify isolation and zero energy before work begins:
-
I position myself to avoid:
-
moving objects
-
vehicles
-
pressure releases
-
dropped objects
-
-
I establish and obey barriers and exclusion zones
-
I take action to secure loose objects and report potential dropped objects