google-site-verification=N_Yqx9RjHE2kOk6P3YFc_GSDsv_91ndCrPdIe95GCIo
top of page
FH Contractors Safe at Work HMS

Safety Rules

Safety is our top priority. As a company with 400 employees, it is crucial for us that everyone – whether working at sea, in the air or on land – feels safe. Therefore, we have developed clear guidelines that everyone must follow.

As an employee of FH Contractors, it is your duty to:

​

  1. Follow the applicable safety and health regulations at the workplace.

  2. Contribute to ensuring that safety measures work as intended.

  3. Ensure that temporarily removed safety measures (e.g. during repairs) are re-established.

  4. Report any faults or deficiencies that are significant for the environment, safety and health to those responsible.
     

You must always familiarize yourself with local health, safety and environmental regulations, and any stricter requirements at the workplace always take precedence over FH Contractors' general requirements. ​

 

Below are the safety rules for various work situations.

FH Contractors' guidelines represent the minimum safety standards, unless otherwise specified in writing. Local safety requirements from other companies that relate to your work must take precedence over FH Contractors' guidelines. You must always comply with the laws of the country in which you are working. Violations may result in repatriation. Alcohol and intoxicating substances are prohibited in the workplace, and intoxication or impairment will not be tolerated. Abuse will result in immediate dismissal at your own expense.

Remember, safety always comes first!

​

These guidelines constitute the foundation for health, environment, safety, and quality at FH Contractors. By adhering to them, you contribute to our common goal of maintaining a high level of safety in the workplace, which protects both people, the environment, and equipment.

Guidelines

9 Life Saving Rules

Life-Saving Rules FH Saftey Control

Bypassing Safety Controls

Obtain authorisation before overriding or disabling safety-controls:

  •  I understand and use safety-critical equipment and procedures which apply to my task

  • I obtain authorisation before:

    • disabling or overriding safety equipment

    • deviating from procedures

    • crossing a barrier

Life-Saving Rulle Confined Space

Confined Space

Obtain authorisation before entering a confirned space:

  •  I confirm energy sources are isolated

  • I confirm the atmosphere has been tested and is monitored

  • I check and use my breathing apparatus when required

  • I confirm there is an attendant standing by

  • I confirm a rescue plan is in place

  • I obtain authorisation to enter.

Life-Saving rule Safe mechanical lifting

Safe Mechanical Lifting

Plan lifting operations and control the area:

  •  I confirm that the equipment and load have been inspected and are fit for purpose

  • I only operate equipment that I am qualified to use

  • I establish and obey barriers and exclusion zones

  • I never walk under a suspended load.

Life-Saving rule work authorisation

Work Authorization

Work with a valid permit when required:

  •  I have confirmed if a permit is required

  • I am authorised to perform the work

  • I understand the permit

  • I have confirmed that hazards are controlled and it is safe to start

  • I stop and reassess if conditions change.

Life-Saving rule drive safe

Driving

Follow safe driving rules:

  •  I always wear a seatbelt

  • I do not exceed the speed limit, and reduce my speed for road conditions

  • I do not use phones or operate devices while driving

  • I am fit, rested and fully alert while driving

  • I follow journey management requirements.

Life-saving rule hot work

Hot Work

Control flammables and ignition sources:

  •  I identify and control ignition sources

  • Before starting any hot work:

    • I confirm flammable material has been removed or isolated

    • I obtain authorisation

  • Before starting hot work in a hazardous area I confirm:

    • a gas test has been completed

    • gas will be monitored continually.

Life-Saving rules working at height

Working at Height

Protect yourself against a fall when working at height:

  • I inspect my fall protection equipment before use

  • I secure tools and work materials to prevent dropped objects

  • I tie off 100% to approved anchor points while outside a protected area.

Life-Saving rule energy isolation

Energy isolation

Verify isolation and zero energy before work begins:

  •  I have identified all energy sources

  • I confirm that hazardous energy sources have been isolated, locked, and tagged

  • I have checked there is zero energy and tested for residual or stored energy.

Safety icon FH Conreactors

Line of fire

Verify isolation and zero energy before work begins:

  • I position myself to avoid:

    • moving objects

    • vehicles

    • pressure releases

    • dropped objects

  • I establish and obey barriers and exclusion zones

  • I take action to secure loose objects and report potential dropped objects

bottom of page